Norglass Paints & Specialty Finishes

Norglass Paints & Specialty Finishes Norglass is an 100% family-owned Australian business. We are a specialist manufacturer of high quality coatings for just about any surface.

The weather is heating up and it's the perfect time to get your outdoor area ready for long summer afternoons with frien...
07/09/2026

The weather is heating up and it's the perfect time to get your outdoor area ready for long summer afternoons with friends. If you have some concrete that's looking a little sad, it probably just needs a good clean, and we have just the thing.

Norglass Concrete and Ceramic Cleaner is a fast acting cleaning product for concrete and ceramic tiles, using the latest technology in wetting agents to achieve better pe*******on into the whole surface giving you a superior result.
It's as easy as 1,2,3.

1. Wash the surface over with fresh water.
2. Apply Concrete Cleaner to the surface and scrub in with a stiff bristle nylon brush and leave for 15-20 minutes.
3. Hose off with full water pressure and allow to dry.

That's it!

31/08/2026

Looking for a specific colour for your driveway? Look no further than Norglass Paving Paint.

Available in slip resistant or smooth, we can help you mix the perfect custom colour to compliment your house. If you’d like a hand with the details, have a chat with one of our friendly experts on 02 9708 2200 or email [email protected]

diyprojects familyowned familyrunbusiness independentbusiness australianmade australianowned australianbusiness diyhelp

31/08/2026

Looking for a specific colour for your driveway? Look no further than Norglass Paving Paint.

Available in slip resistant or smooth, we can help you mix the perfect custom colour to compliment your house. If you'd like a hand with the details, have a chat with one of our friendly experts on 02 9708 2200 or email [email protected]

🔍 Substrate Spotlight 🔍 Fibreglass can be intimidating to work with for beginners, but with the right information you'll...
21/08/2026

🔍 Substrate Spotlight 🔍
Fibreglass can be intimidating to work with for beginners, but with the right information you'll have great results in no time.

Our hot tips:
🔥 Make sure to thoroughly clean and remove all contaminants before repair to avoid bigger problems later
🔥 To repair a damaged, pinholed fibreglass surface, use Shipshape primer – forcing the product deep into the surface to fill the holes before painting
🔥 When painting fibreglass, use a 2 pack product (like Northane) for superior adhesion

Our Fibreglass Information Guide (found on our website) goes into much more detail so you can be fully informed before you start your project. And if you have questions on how to get the best results, reach out to our tech experts.
Norglass Tech Info: Call 02 9708 2200 or email [email protected]

🚨 NEW PACKAGING ALERT 🚨 Our Liquid Glass packaging has had a little work done – same great product inside, fancy new loo...
14/08/2026

🚨 NEW PACKAGING ALERT 🚨

Our Liquid Glass packaging has had a little work done – same great product inside, fancy new look outside.Your go-to for expressing your creativity, Liquid Glass is fantastic for making river tables, jewellery and homewares, as well as more practical applications like gap filling. Our website has all the details you need to get started (look under Information Guides) so you can let your imagination run wild.

DIY Pro TipFor a more flawless finish when painting timber, fill any small imperfections WHILE priming with Pri-Coat.Pri...
07/08/2026

DIY Pro TipFor a more flawless finish when painting timber, fill any small imperfections WHILE priming with Pri-Coat.
Pri-coat has built-in filling properties, meaning it smooths out any small dents and dings during your primer coat, resulting in a much smoother and more professional looking finished result. Talk about a time saver!
As always, if you have questions our tech experts are available for a chat on 02 9708 2200 or email [email protected]

29/07/2026

We’re set up and ready to go once again at the Sydney Boat Show!

We are there starting tomorrow at the Sydney Showgrounds, Olympic Park, running daily until Sunday August 2nd between 9-5!

Come see Brett, John, Mike and Ash at the Norglass display trailer to talk about all your boating DIY needs and have a look at our range!

📣 Shoutout to Carlos, our wonderful Paint Chemist 📣Carlos is the person responsible for formulating each and every one o...
24/07/2026

📣 Shoutout to Carlos, our wonderful Paint Chemist 📣
Carlos is the person responsible for formulating each and every one of our products, ensuring that we can deliver the best performance possible for harsh Aussie conditions.

Not only that, he's a champion DIY-er and makes most of the samples and projects that we use to showcase our products when we meet you all at trade shows. He's one of the best Paint Chemists in Australia and we're incredibly lucky to have had him as a member of the team for over 25 years. Thanks for your invaluable hard work Carlos!

Our most versatile product, built specifically for harsh Aussie conditions – we (humbly) believe that Northane is the be...
17/07/2026

Our most versatile product, built specifically for harsh Aussie conditions – we (humbly) believe that Northane is the best 2 pack coating on the market.
Northane's high grade raw materials mean better adhesion, higher durability and longer lasting results.
⚡ Hard wearing
⚡ Chemical resistant (once cured)
⚡ Highly versatile across substrates and project types

Norglass Tech Info: Call 02 9708 2200 or email [email protected]

Doing some resin work through winter? Temperatures under 15°c can affect the viscosity of the resin, making it more diff...
10/07/2026

Doing some resin work through winter? Temperatures under 15°c can affect the viscosity of the resin, making it more difficult to mix the base and hardener together.

When using Liquid Glass in cold temperatures, we recommend placing the base can into a plastic bag and sitting it in hot water for 3-5 minutes prior to mixing in the hardener. This will bring the base product up to room temperature (20°c-ish) and help to ensure better chemical results.

Still having trouble? Chat to our tech experts on 02 9708 2200 or email [email protected]

Address

Punchbowl, NSW

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 4pm

Telephone

+61297082200

Website

Alerts

Be the first to know and let us send you an email when Norglass Paints & Specialty Finishes posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share